In this blog, you will know applications of multi cartridge filters, when to replace and how to replace multi cartridges. Also, you need to know tips before buying multi cartridges; if you want to know about tips to buy multi cartridges, visit our previous blog.
Applications of multi cartridge filters:
The following are the applications of cartridge filters:
Water treatment plants
Pharmaceutical, food and other industries
In the fine filtration and sterilization process
Water, oil, ink liquid purification
Textile, printing and dyeing
Reverse osmosis system
When to replace your Cartridge Filter:
Filter cartridges are used in different industrial places to trap all contaminants and solid waste. These liquid filter cartridges need to replace when they reach pre-set differential pressure. Therefore, it is also very important to know when you need to replace the filter cartridge. The multi cartridges are provided with some general guidelines and suggest that how many days they can work. For example, suppose for every 30 days or 45 days based on the dirt holding capacity. The number of working days of a cartridge also depends on the concentration of those contaminants in the liquid.
The process to replace filter multi cartridges:
The following process is required to replace multi filter cartridges:
- Shut down the system and depressurize it.
- Open that air vent valve and the drain valve.
- Clean that drain valve
- Remove that housing lid.
- Remove wing nuts and the alignment plate.
- Carefully remove that springs from every cartridge filter top. Ensure that spring does not fall into that housing.
- Carefully pull out that multi cartridge.
- Check the housing if there is corrosion or dirt residue. So clean the housing if necessary.
- Remove that protective covering of the new cartridge filters and fit it inside the housing.
- Handle that cartridge carefully and place it in the housing using the alignment plate.
- Once multi cartridges are in the correct place, reinstall all those springs, then the alignment plate and wingnuts.
- Ensure all those fitments are in better condition and securely installed in that place.
- Clean and lubricate that O ring and then replace the housing lid.
- Screw that housing lid into place.
- Close that drain valve
- Purge air in that system by running water through that filter.
- Close that air vent valve.
Follow the above guidelines carefully while replacing multi cartridges.
MULTI CARTRIDGE FILTER is a filter that purifies water. Multi cartridge filters are nothing but two or more cartridges placed into the housing to purify water. So through this blog, you will get the top 8 tips to choose the best multi-cartridge filters.
Eight tips for choosing the best FRP multi-cartridge filters:
The following are the eight tips to choose the best multi-cartridge filters:
Corrosion resistance factors play an important role while choosing FRP multi cartridge filters. Sometimes feed water may also contain highly concentrated chemicals along with suspended particles. If it is not corrosion free, then automatically, after some extend, it may get rust. Also, as final output, it may produce rust water, and you may get an unpleasant smell from water. Better to choose a corrosion free multi-cartridge filter before purchasing it. If you choose a corrosion-free multi cartridge filter, then you can use them for a long time run. In case if you choose zero corrosion multi cartridge undoubtedly, you need to change filters frequently.
Easy to manage:
Better opted for easy managing along with good working efficiency multi cartridge filters to save time and energy. You can understand if they are easy to manage. If they aren’t easy to manage, you have to understand pin to pin information and remember all info related to multi cartridge filters.
The main aim of using multi cartridges is to work efficiently to remove all impure particles and solids. So better check whether it was working with high capacity to produce pure water before buying it.
Quality is one of the core factors while purchasing FRP multi cartridge filters. Best quality products work for a long span. So always check and choose quality multi cartridges to work for the long run.
FRP Multi cartridge filters is much reasonable and affordable than Stainless Steel Housings
Low maintenance is one of the foremost factors along with quality. To save your penny, better to select low maintenance multi cartridge filters.
Durability is one of the primary factors that you need to check before buying multi cartridge filters. Best to opt for more durable FRPmulti-cartridge filters for working effectively and long run.
Before purchasing this product, you need to check for a manufacture warranty. The same applies to multi cartridge filters, too; as multi-cartridge filters are used in different sectors, better to choose the best company along with the above factors, which provides long term warranty.
I hope this blog is very useful to everyone, especially those who are willing to buy multi-cartridge filters. Better go and purchase for all factors above at single roof industry, i.e. Sahara industry. We offer multi-cartridge filters with all the above factors and always aims for customer satisfaction.