Usually, a person can leave without eating food, but he or she cannot leave without drinking water. So we ensure what we are drinking safe water. But it is wrong because our water contains harmful chemicals that our naked eyes do not see. So we need to check the TDS of our drinking. Even our WHO says that 50 to 150 ranges are acceptable for drinking. Now definitely, you will get a doubt of “what is TDS.” Read this blog you will know in-depth about TDS.
What is TDS in water?
TDS means the concentration of dissolved organic and inorganic substances in the water. This value changes from place to place because containments also vary in particular regions.
Why should we need to measure TDS?
Water is a solvent, and it can dissolve chemicals. So need to check it better and also the following are the few reasons to measure TDS in the water:
For good health:
Drinking high TDS value water will not affect our health, but lead, copper in them will lead to several health issues. It also makes your pocket empty as you need to pay more to hospitals.
TDS value also shows effects on the taste of your drinking water. You feel uncomfortable consuming water as it is a little bit salty and bitter. It is also, depending on your region.
Chart of TDS value for drinking water:
The following chart describes the TDS value suitable for drinking water.
- Less than 50 are not accepted as it has no essential minerals
- 50-150 Accepted for drinking.
- 150-250 is acceptable, especially for people who have cardiovascular disease
- 250-350 is Good and acceptable, especially for people who have cardiovascular disease
- 350-500 is fairly accepted and preferred
- 500-900 is ok to accept but less preferred.
- 900-1200 is not acceptable.
- 1200-200 water is not acceptable for drinking.
- Above 2000 is not acceptable for drinking
How to reduce this problem?
You can reduce this problem with the various processes. The following are different processes helpful:
You need to boil the water to produce water vapour in the distillation process. Then the vapour rises cool and comes back to liquid form.
Reverse osmosis process:
Reverse osmosis is an effective way to remove iron. It will pass water forcibly through a membrane. That membrane will only allow molecules smaller than 0.0001 microns. So that as final output, you will get purified water.
We all know the importance of drinking water and how it plays a key role in all our lives. So choose the best RO plants for best results. Also, purchase from best industry i.e. Sahara industry. Sahara industry is a well-known industry and offers all types of water treatment products with 25 years of personal experience. Also aims for the customer’s satisfaction and do not compromise on the quality. You feel worthy with an affordable price and with the finest quality. They even provide a warranty and also assure for the long span working of any industrial product.
In this blog, you will know applications of multi cartridge filters, when to replace and how to replace multi cartridges. Also, you need to know tips before buying multi cartridges; if you want to know about tips to buy multi cartridges, visit our previous blog.
Applications of multi cartridge filters:
The following are the applications of cartridge filters:
Water treatment plants
Pharmaceutical, food and other industries
In the fine filtration and sterilization process
Water, oil, ink liquid purification
Textile, printing and dyeing
Reverse osmosis system
When to replace your Cartridge Filter:
Filter cartridges are used in different industrial places to trap all contaminants and solid waste. These liquid filter cartridges need to replace when they reach pre-set differential pressure. Therefore, it is also very important to know when you need to replace the filter cartridge. The multi cartridges are provided with some general guidelines and suggest that how many days they can work. For example, suppose for every 30 days or 45 days based on the dirt holding capacity. The number of working days of a cartridge also depends on the concentration of those contaminants in the liquid.
The process to replace filter multi cartridges:
The following process is required to replace multi filter cartridges:
- Shut down the system and depressurize it.
- Open that air vent valve and the drain valve.
- Clean that drain valve
- Remove that housing lid.
- Remove wing nuts and the alignment plate.
- Carefully remove that springs from every cartridge filter top. Ensure that spring does not fall into that housing.
- Carefully pull out that multi cartridge.
- Check the housing if there is corrosion or dirt residue. So clean the housing if necessary.
- Remove that protective covering of the new cartridge filters and fit it inside the housing.
- Handle that cartridge carefully and place it in the housing using the alignment plate.
- Once multi cartridges are in the correct place, reinstall all those springs, then the alignment plate and wingnuts.
- Ensure all those fitments are in better condition and securely installed in that place.
- Clean and lubricate that O ring and then replace the housing lid.
- Screw that housing lid into place.
- Close that drain valve
- Purge air in that system by running water through that filter.
- Close that air vent valve.
Follow the above guidelines carefully while replacing multi cartridges.
MULTI CARTRIDGE FILTER is a filter that purifies water. Multi cartridge filters are nothing but two or more cartridges placed into the housing to purify water. So through this blog, you will get the top 8 tips to choose the best multi-cartridge filters.
Eight tips for choosing the best FRP multi-cartridge filters:
The following are the eight tips to choose the best multi-cartridge filters:
Corrosion resistance factors play an important role while choosing FRP multi cartridge filters. Sometimes feed water may also contain highly concentrated chemicals along with suspended particles. If it is not corrosion free, then automatically, after some extend, it may get rust. Also, as final output, it may produce rust water, and you may get an unpleasant smell from water. Better to choose a corrosion free multi-cartridge filter before purchasing it. If you choose a corrosion-free multi cartridge filter, then you can use them for a long time run. In case if you choose zero corrosion multi cartridge undoubtedly, you need to change filters frequently.
Easy to manage:
Better opted for easy managing along with good working efficiency multi cartridge filters to save time and energy. You can understand if they are easy to manage. If they aren’t easy to manage, you have to understand pin to pin information and remember all info related to multi cartridge filters.
The main aim of using multi cartridges is to work efficiently to remove all impure particles and solids. So better check whether it was working with high capacity to produce pure water before buying it.
Quality is one of the core factors while purchasing FRP multi cartridge filters. Best quality products work for a long span. So always check and choose quality multi cartridges to work for the long run.
FRP Multi cartridge filters is much reasonable and affordable than Stainless Steel Housings
Low maintenance is one of the foremost factors along with quality. To save your penny, better to select low maintenance multi cartridge filters.
Durability is one of the primary factors that you need to check before buying multi cartridge filters. Best to opt for more durable FRPmulti-cartridge filters for working effectively and long run.
Before purchasing this product, you need to check for a manufacture warranty. The same applies to multi cartridge filters, too; as multi-cartridge filters are used in different sectors, better to choose the best company along with the above factors, which provides long term warranty.
I hope this blog is very useful to everyone, especially those who are willing to buy multi-cartridge filters. Better go and purchase for all factors above at single roof industry, i.e. Sahara industry. We offer multi-cartridge filters with all the above factors and always aims for customer satisfaction.
We all know that our earth crust has a minimum 5% of iron. Even our scientist identifies iron as the contributor of colours like red, yellow and brown to soil and rocks. Also, iron is one of the reasons for the red colour in the blood cells. So iron is one of the foremost metals in our lives. But drinking iron water is good for your health? No. drinking water with iron content can lead to serious illnesses like cholera, diarrhoea, and chronic cholic infections and reduce immunity. Also, its tastes and smell is very bad and makes you feel unpleasant.
How can we identify the iron content present in the water?
We all know that iron is present in the water in two forms, i.e. ferrous and ferric iron. Ferrous iron completely dissolves in the water, whereas ferric iron is oxidized. So it turns the water into brownish, yellowish, red colour and gives you a metallic taste while drinking it.
Simply if your water appears in colours like brown, yellow and red with foul smell and taste, then it has iron content. So it would be best if you used iron removal filters like Sahara iron removal filters to reduce the excess content of iron.
Effects of excess iron content water on humans:
The following are the effects of excess iron on human health:
Excess iron can seriously affects human health by causing cholera, diarrhoea, chronic cholic infections, teeth infections and reducing immunity. Basically, iron content in water is 10 milligrams per litre, but 0.3 milligrams per litre also turns your water into yellow, brown, or red. If your water absorbs too much water, it can sometimes lead to death. Also, it can cause strains in the bathroom and is responsible for clogged pipes.
Different ways to remove iron from the water:
The following are the different ways to remove iron from the water:
- Water softeners
- Iron removal filters
- Catalytic Filtration
- Oxidizing filters
- Chemical Oxidization
- Phosphate Treatment
The lifespan of iron removal filters:
The lifespan of iron removal filters may be vary depending upon your usage, maintenance and quality. If you choose the best quality iron removal filter and good maintenance, it can last for approximately ten years.
Best way to remove excess iron in water:
The best and effective way to remove excess iron in water is through iron removal filters. You can easily install them too. It had a very high capacity to remove iron content, and even it works effectively for both domestic and bore well water too. It looks elegant and also works on the non-electric process. Also, it is very easy to clean whenever you want to clean. Even they are cost effective with the best quality.
So better choose quality iron removal filters from the best manufacturing industry, i.e. Sahara, for better results.
Sahara is one of the leading manufacturing and exporting industries in India. Even it offers other water treatment products with affordable prices and quality. Also, the Sahara industry has 25 years of experience in an industrial area.
Everyone loves their hair. Even we cannot think how much we invest for our beautiful hair. But if you tried of your frizzy, dry, tangled hair, you have not seen a difference in hair texture, colour, and even your taking best, expensive treatment and products. So obviously, hard water is the criminal for it. It is the root problem. Most places in India will get hard water, which badly affects your hair, skin, utilizes, pipelines, home appliances, and money. This blog is more useful if you are also facing the same issue.
How can hard water affect the hair?
Hard water badly affects your hair texture and colour and leads to dryness. The more hard water you use, the more effective to your hair. A mineral present in the hard water can squeeze the lifespan of your pretty hair. Let us see a few minerals in hard water and how they affect your hair:
- The calcium on your hair will absorb the moisturizers from your hair care products which lose the nourishing value.
- Even there is a chance of increasing the growth of bacteria and infections.
- Also, a few minerals will still stay on your scalp even after the bath, making your hair brittle.
- Due to brittle textures, hair breakages are seen.
- Minerals will also make your hair dry and cause dandruff problems.
- If a few minerals enter your scalp, you will face itching and inflammations.
- Even the presence of minerals in soaps and shampoos makes it ineffective.
- If you shower with hard water frequently, it makes your hair look so dull and frizziness.
Does the PH level of water also play an important role in affecting hair?
Not only for drinking water, but you also need to consider the pH level of water that you use for showering and washing. It is because hair has a PH scale of 4.5 to 5, but the hard water scale is 8.5 or above. Even if your hair care product’s PH level increases above 5, it is also one reason for frizzy hair.
How can you save from hard water?
If you still face issues even after expensive hair treatment and using hair care products, you need to check for the main problem, i.e. hard water. The only way to reduce this problem is by installing water softeners. Even if you choose the traditional water softener method, it may not give effective results and consumes a lot of time. Better choose the latest water softeners. Water softeners will reduce excess calcium, magnesium and other few minerals and makes water soft. Even they do not use any electricity or chemicals, you can safely use them.
Explore more above water softeners in our previous blogs.
If you feel hard water is the root problem for your dry, frizzy hair, better use water softeners. Using water softeners will not only reduces your hair problems but also help in reducing skin problems, saves your extra pennies, no fade colors of your clothes, no frequent repairs to your appliances. One more foremost thing is that you need to choose quality water softeners from the best suppliers, i.e. Sahara industry.
One of the major issues we are facing today is water. So to resolve this issue, many new equipments are designed and are up to date with the latest technologies. Obviously, there will be a huge demand for the latest products in the market. Everyone has been confused and had many questions about choosing the best company for taking the franchise to water treatment products. So do not worry! Through this blog, I will help you for choosing the best option.
Check for their online presence:
Now everything is digitized, so check for their online presence. Here you can check about it, products, prices, reviews etc. All these help you to know whether it is the best company or not.
Another important factor you need to see is their experience in the industry. Higher the experience, higher the quality they maintain during manufacturing products, and higher integrations. So if you take franchises from them, you will also grow faster with their inputs and experiences feedback.
One of the foremost factors that every franchiser looks at company integrations and their relationship in the market. If they have multiple integrations, you can sell multiple branded products. It can you give more profits. But they do not have integrations; you need to sell one branded product. It cannot help grow faster as you have a single branded product.
Quality checking is the primary factor you need to see while taking a franchise. Even they have integrations,in-time delivery, and contact support, which cannot help you grow. People only visit again if you maintain quality product stock.
From company to company and for product to product, wholesale price varies. Check for the low price with quality products. Contact two or three companies and vary prices, quality products and above mentioned factors.
Communication plays a crucial role in any business. So check whether they maintain contact support whenever you need it. Also, check whether they provide solutions whenever you face problems with products after delivery. If not, reject them even if they have above mentioned positive factors.
In time delivery:
After the agreement and successful payments, check whether you are getting in-time delivery or not. If not, choose the other best company. If you do not maintain stock, customers can visit other companies.
Replacement of products:
Sometimes you may receive damaged products after delivery. So ask them whether they will replace that product or not. It is not an issue if they are few, but getting many damaged products may lead to loss.
I hope this informative blog will help you and be very useful while choosing a franchise. It is always to choose one best company with above mentioned factors at one roof, i.e. Sahara industry. Sahara industry is the top industry in India with ISO 9001: 2000; ISO 14001:2000& ISO 45001-2015 (OCCUPATIONAL HEALTH AND SAFTY MANAGEMENT) certification. Also, have many integrations with national and international companies. They also maintain quality product stock with 25 plus years of experience. You will receive the best communication with better input guidelines.